Registered: 02/06/02
Posts: 2428
Loc: Republic of Davis
(169.237.212.1)
Offline
so with tax returns, dividends and birthday money coming in i am contemplating the idea of getting some ski gear. don't really know much about skiis since i have been snowboarding since high school. I will mainly be in the tahoe area, but it would be nice if i could use the gear for resorts as well.
yes this may sound like a dumb question but i am curious as to how much i would be shelling out if i went through with it. i would need basically everything.
_________________________
Just Call me Mr. Enthusiasm
Registered: 04/03/03
Posts: 495
Loc: In the midst of a "psychotic b... (68.190.178.218)
Offline
Dude,
Don't fall prey to "the dark side."
Buy a splitboard. If you already have boots and bindings, all you need is the board. Prices range from $600 to $1000 for a complete set-up (board, interface, skins, crampons.)
Here are the manufacturers that are currently making splitboards:
Voile - everyone licenses their interface. They're boards appeal to specific tastes, though. They basically have 2 models; supersoft (freeride) for powder or superstiff (Mtn. Gun) for steep hardpack
Prior - My personal favorite. They have a ton of different shapes, and they use an icredibly lightweight fiberglass... check out www.priorsnowboards.com
Winterstick - They have their first model, now. Basicaly a split version of the Sever Terrain 162
Neversummer - They will split any of heir shapes. The boards are works of art, but they are pretty $spendy$
Burton - They will have a few shapes next year, but noone is sure what they will be. We do know that they have dropped their interface and are licensing the Voile system... much more reliable.
Splitboards kick ass... You'll be amazed at how well they perform in solid mode. Jim Zellers, Tom Burt, Jonaven Moore and others can't be wrong.
Zach
_________________________
Give me liberty, or give me death!
Registered: 02/06/02
Posts: 2428
Loc: Republic of Davis
(169.237.212.1)
Offline
how do they manage on traverses and such.. from what i heard they are more geared towards more straight up down due to the lack of an internal metal edge
_________________________
Just Call me Mr. Enthusiasm
Registered: 04/03/03
Posts: 495
Loc: In the midst of a "psychotic b... (68.190.178.218)
Offline
You heard wrong...
Do-it-yourself versions do not have an inside edge, but all of the production models have it.
There are ZERO limitations with a splitboard. I can skin any terrain that a skier can, and i can go steeper if i need to. The performance of the production models is also comperable to solid boards, so I never notice any lack of performance on the descent.
If you're up in Tahoe some weekend, you can try to follow me on snowshoes, and you'll see what I mean
Zach
_________________________
Give me liberty, or give me death!
Registered: 11/15/99
Posts: 1794
Loc: Denver, CO
(67.177.42.130)
Online
in addition to whatever you spend on skis or a splitboard, you need these things as well:
avalanche beacon - around $300 or so
shovel - $60 i think? been awhile since i bought one. get one with a good metal blade.
probe - $30 or so i think?
and most importantly, fresh batteries for the beacon - $2.
i always carry a slopemeter, and usually carry a small snow study kit too. this stuff doesn't cost too much.
adjustable poles are nice, but not 100% necessary if you only have fixed length poles. i use the same poles for hiking in the summer.
if you go with skis, the BD clipfix ascension skins are nice. get them wide enough to cover your entire ski, and trim them so your edges show. they are about $100. i've never used ski crampons, though sometimes i have sure wished i had them.
you do not want to flail in the backcountry - if you are a good snowboarder and not a good skiier, go with a splitboard unless you just really want to ski(and who could blame you for that?). ski rigs are getting much more expensive now because of the strong euro - AT bindings especially are going up in price. for a good AT setup, plan on spending about $500 on boots, $500 on skis, and maybe $350 on bindings if you go full retail. i generally just mount AT bindings on some sort of telemark ski. the skis especially will vary wildly in price depending on what sort of ski you are looking for.
i do all of my resort skiing in my AT gear, though ideally i would have another much lighter AT setup and a full on alpine setup for resorts.
_________________________
This isn't an office. It's Hell with fluorescent lighting.
Registered: 07/10/00
Posts: 2794
Loc: Sandy, UT
(207.88.151.217)
Offline
Quote: in addition to whatever you spend on skis or a splitboard, you need these things as well:
avalanche beacon - around $300 or so shovel - $60 i think? been awhile since i bought one. get one with a good metal blade. probe - $30 or so i think? and most importantly, fresh batteries for the beacon - $2.
And in addition to all that, at least a level 1 avalanche class. If you need to use the gear Andrew listed, you've already royally f'cked up. Don't forget that your partner(s) need all that stuff, too, plus knowing how to use it. If you're buried and your partner needs to go get help, then it's no longer a rescue, just a body recovery.
_________________________
- Marc
Proud Member of the Reality-Based Community
Registered: 11/15/99
Posts: 1794
Loc: Denver, CO
(67.177.42.130)
Online
true that. a couple of the folks killed in avalanches in utah this winter were located and dug out within a few minutes, but were already dead from trauma. but you really do need the shovel for doing most meaningful snowpack tests.
_________________________
This isn't an office. It's Hell with fluorescent lighting.
Registered: 08/04/02
Posts: 1986
Loc: a heavily fortified bunker!
(67.86.6.183)
Online
Quote: i don't really care much about an adjustable tail since i trim my skins to fit my skis anyway.
so do I, but... oh hell, I have enough problems getting the tail hook to stay put even WITH adjustable tension, I imagine it would be much worse if I had to unglue the tip flap all the time to make the adjustment.